02/20/11

Information

Support

Replacement Displays for use in Gottlieb Pinball Machines.

Installation Instructions

Important note about machines with Ni-Wumpf System 80 CPU boards: If you have a machine with a System 80 Ni-Wumpf replacement CPU board (before serial number 378), you will need to do an upgrade to the FPGA code. Their code has been updated to correct a ghost display on the left most digit.
There are several ways to upgrade your board.
1. Do it yourself, you will need a computer and a serial cable.
2. Send it back to Ni-Wumpf for upgrade.

For instructions on how to upgrade your CPU click here

Full Instructions for Installation of our display kits